Looking forward and hopefully the spring will bring lots of flowers for my vase.
It is made in clay 208 from Goerge&Schneider and glazed with yellow orange 2482 from Sorring and rust red 1306 altso from Sorring and a little bit of iron oxid. It’s fired to 1235 degrees.
Outside glazed with blue grey with spots ( Silicanordic 42032)
Clay: Goerge&schneider 208
Inside glaze: Peppermint (Silicanordic 42012)
Outsside glaze: At the bottom Forget-me-not (Botz 9863) at the top Ice crystal (Botz 9898)with effect generator.
Clay: Goerge&Schneider 208
Inside glaze : Peppermint (Silicanordic 42012)
Outside glaze: one layer Winter blue (Silicanordic 42320) and after it is dried, at dip of Grey with effect (Silicanordic 42013)
Recycled clay
Inside glaze: red mottled (Sorring 2460)
Outside glaze; one dip in red mottled (Sorring 2460) and a second dip in Yellow orange (Sorring 2482)
Clay: Goerge&Schneider 233
Inside glaze: Sand with effect (Silicanordic 42008) and when it is dried at very som soap bubbles with ionoxid.
Outside glaze: Grey with effect (Silicanordic 42013) and a very thin layer of ionoxid.
Clay: Goerge&Schneider 371
Inside glaze: slate grey (Sorring 1318)
Outside glaze: Nephrite green (Silicanordic 42312)
Clay: Goerge&Schneider 208
Inside glaze: Grey with effect (Silicanordic 42013)
Outside glaze:Blue grey with effect (Botz9882) and a thin layer of effect generator.
Clay : Goerge&Schneider 208
inside glaze: ice crystal (Botz 9898)
Outside glaze: On the upper half is it ice crystal (Botz 9898), and the lower half is glazed with Rose rock (Botz 9864)
Clay : 233 from Goerge&Schneider
Inside glaze: Grey with effect ( Silicanordic 42013)
Outside glaze: Black blue speckle(Botz 9883) and a thin layer of effect generator.
Clay : 233 from Goerge&Schneider
Inside glaze: grey with effect ( Silicanordic 42013)
Outside glaze: I layer of Violet with effect ( Silicanordic 42311) and then a quick dip in grey with effect ( Silicanordic 42013).
Clay: 233 from Goerge&Schneider
Inside glaze: Rust reed (Sorring 1306)
Outside glaze: some stroke with a brush dipped in ionoxid, and af drying, the mug is dipped in yellow orange (Sorring 2482).
Clay: 208 from Goerge&Scneider
Inside glaze: Rust reed (Sorring 1306)
Outside glaze: some stroke with a brush dipped in ionoxid and som stroke with off white ((Sorring 1364) , and af drying, the mug is dipped in yellow orange (Sorring 2482).
Clay: 208 from Goerge&Scneider
Inside glaze: Grey with effect (Silicanordic 42013)
Outside glaze: On top driftwood ( Botz 9866), in the middle Patina (Botz 9867) in the bottom Turquoise granite ( Botz 9890) and on the upper half at thin layer of effec generator.
Recycled clay
inside glaze: slate grey ( Sorring 1318)
Outside glaze. Bright blue effect ( Botz 9879) on the entire outside, and after dried, is the upper half dipped in chrystal white (Sorring 1310)
recycled clay
Inside glaze: peppermint ( Silicanordic 42012)
Outside glaze: one dip in grey green with effect ( Sorring 5489) and one dip in grey with effect (Silicanordic 42013)
Grey clay from Sorring. Glaze is one layer of Bots icechrystal and then on layer of 1310 from Sorring.
Clay is 208 from Goerge&Schneider ( Silicanordic). Inside is one layer of white chrystal 1310 from Sorring and outside one layer of skyc blue (Sorring 5207) and one layer of green cracle (Sorring 4042) – a very running combination.
Clay is Goerge&Schneider with spots 933 (Silicanordic). inside and on top of the outside is rust reed (Sorring 1306) and a second layer on the outside with green cracle (Sorring 4042) – a running combination.
Clay is Goerge&Schneider with spots 933 (Silicanordic). Inside is glazed with sand with effect (silicanordic)42008 and oudside is glaze with on layer of yellow orange (Sorring 2482) and 2 layers on the outside top.
Here is my firste experiment wit oxides, and after I’ve played with the oxides, the mug is glazed with yellew-orange 2482 from Sorring.
This mug is made in 933 from Goerg&Schneider, the inside is glazed with grey (Silicanordic 42013) and the outside first one layer grey green ( Sorring 5489) and when it is dried, at quick dip in the grey (Silicanordic 42013) .
The clay is 933 from Goerg&Schneider. Inside glazed with sand ( Silicanordic 42008) and outside 2 dip with yellow orange ( Sorring 2482).
The clay is 933 from Goerg&Schneider. Inside glazed with sand ( Silicanordic 42008) and outside copper green ( Sorring 1373).
Clay: Goerge&Scneider 208, inside glaze rust red with spots (Sorring 1306) and outside seablue (Silicanordic 42321).
This one is made in at grey clay. The black color in the letters(9888), and the colors of the houses is brush glaze from Botz. The rest is glazed with slate grey from Cerama (1318).
This is door sign is made i a grey clay. The colors in the letters is made by ion oxyd and the glaze i coppergreen, Cerama (1373).
This sign is made in at light clay with spots. The letters is colored with black from Bootz(9888) and the rest is glazed with a Botz craque glaze.
I try to make a door sign for my so’s new apartment. I have made 4 proposals. Here they are just dried. now I look forward to getting them fired and glazed.
The letter types are 3d printed (Lonnie Jacobsen Lauridsen).
This summer I dried some flowers. It was both wild flowers and cultivated flowers. Now they are in at couple of vases that I may not be quite happy with, but the flowers make them look beautiful.