I cut a bigger hole in an old lp and layed it on top of my bat system. I placed my forms on the lp.
I rolled out the clay to about 5 mm thickness, smoothed it and moved it onto the mold.
The plates had to have a rim. For my plates it should be 2 cm.
I made the bottom part of the plate, I used my homemade extruder ,-)
I released the plate from the bat system and the lp byt presseing the hand behind the batsystem. I let the plate dry a bit and then I removed the molds an put the plate on an foam. The rim is presed a bit down to get the right angel.
